Arizer Extreme Q Discontinued: What Owners Need to Know
Arizer has confirmed to retailers, including The Vapetrix, that the Extreme Q is discontinued and will no longer be available. Orders already submitted to Arizer are being honoured. If you own this desktop dry herb vaporiser, the key point is simple: discontinuation does not mean the end of warranty, service or parts support. If you were planning to buy one, the obvious place to look now is Arizer’s current desktop model, the XQ2.
What has happened to the Extreme Q?
Alongside the confirmation supplied to retailers, Arizer’s own website now places the Extreme Q in the Arizer Vault, its archive of past models. The page states that, as the Extreme Q enters the Vault, “its legacy endures with continued warranty, service, and parts support”. That public statement matters to existing owners: discontinuation does not mean the end of help with the unit.
Other retailers’ listings now show the Extreme Q as discontinued and out of stock, directing buyers towards the XQ2. Any remaining retail stock is finite, so treat it as a last chance rather than an ongoing option. The Extreme Q is now a past model, and the XQ2 is Arizer’s current desktop offering.
What was the Arizer Extreme Q?
Arizer has been making vaporisers since 2005. The original Arizer Extreme launched in 2008, followed by the Q version around 2010. Described by Arizer as a desktop “multi-purpose heater”, the Extreme Q combined ceramic-element convection heating with several ways to use it, rather than committing owners to a single delivery method.
Dry herb was loaded into a glass Cyclone Bowl, and the temperature could be adjusted from 50–260°C in one-degree increments using the control panel or remote control. According to Arizer’s Extreme Q support page and its desktop comparison chart, it had a 110–240V input, and the chart lists a heat-up time of about 100 seconds and a maximum bowl size of 0.7 g.
The three-foot silicone whip supported direct draw and fan-assisted draw, while the balloon system offered another delivery option. A quiet three-speed fan drove the assisted modes. The Extreme Q also came with a glass aroma diffusion dish, and its dual-wall stainless steel housing stayed cool to the touch. The unit weighed 442 g, stood 170 mm tall and had a 165 mm base.
What does discontinuation mean if you own one?
There is no need to replace a working Extreme Q simply because it has been discontinued. Arizer has explicitly confirmed continued warranty, service and parts support through its Vault page. The practical steps are to keep your proof of purchase, note your serial number and check compatibility when ordering replacement parts.
The published warranty includes lifetime cover for the heating element and a limited three-year warranty covering defects in materials or workmanship. Glass is excluded. Arizer decides whether to repair or replace a unit, and return shipping costs are the user’s responsibility. Discontinuation does not turn those terms into a new or extended warranty.
For warranty enquiries or repairs, contact Arizer at service@arizer.com with a short description of the problem, your serial number and your receipt. If you are unsure whether a specific part is still available from Arizer, ask them directly.
We continue to stock Extreme Q and XQ2 replacement parts. Many accessories are shared between the two units, including bowls, whips, glass elbow adapters, mini whip adapters, filter screen caps and balloon bags. That shared range gives existing owners replacement options for several everyday components.
- For bowl replacements, check the fit notes on the glass Cyclone Bowls and glass Connoisseur Bowls.
- For delivery accessories, browse the whips and glass elbow adapters collection.
- For smaller replacements, consult the filter screens and maintenance parts listings.
Many parts are shared, but compatibility varies. Check each listing’s fit notes before ordering, particularly if you are switching to a different bowl or adapter design.
If you are shopping for a desktop now
The Arizer XQ2 is the natural successor for buyers who want Arizer’s desktop format with both whip and balloon delivery. It uses advanced ceramic convection heating, one-degree temperature control and a quiet three-speed fan. Its large colour display and programmable remote with presets provide updated controls.
The XQ2 also includes a replaceable air intake filter, multi-colour base and heater LEDs, a power-on delay option and an aroma diffusion dish. Arizer lists its heat-up time at about 90 seconds. Like the Extreme Q, it supports direct and assisted draw through a whip, alongside a balloon system.
The bowl deserves particular attention when moving between models. The XQ2 ships with the glass Connoisseur Bowl, which has a larger Cloud chamber and a Flavour chamber. Arizer’s comparison chart confirms that the XQ2 accepts both the Cyclone Bowl and the Connoisseur Bowl. Our Cyclone Bowl and Connoisseur Bowl comparison explains how they differ. The supplied bowl and some accessories differ slightly between the two models.
Other desktop options include the Storz & Bickel Volcano Hybrid and Volcano Classic. If your priority has shifted towards a portable Arizer, the Arizer Solo 3 is another model to consider.
A past model with continuing support
The Extreme Q is discontinued, but Arizer says warranty, service and parts support continue. Existing owners can keep using their units, retain their receipts and turn to Arizer for warranty or repair enquiries. For new desktop buyers, the XQ2 carries the range forward, while compatible replacement parts remain relevant to both models.